Philips 40PFL4901/F7 - Cabinet Disassembly Instructions

4-1 PL15.01-A_DC
CABINET DISASSEMBLY INSTRUCTIONS
Screw Torque Specification
* : For reference
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
*5 : TYPE A
*6 : TYPE B
*7 : 40PFL4701/F8
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following “Reference Notes in the
Tabl e .”
Ref.
No.
Part
Number
Part Name
Tightening
Torque
L3 GBJP3080
SCREW BIND 3CHROM
+P-TITE M3X8.0
5.2±0.9lb·inL28 GCHS3080
SCREW F-PAN BLACK_NI
+S-TITE M3X8.0
L73 GCHP3100
SCREW F-PAN BLACK_NI
+P-TITE M3X10.0
SSK1 2ESA01818
STAND SCREW KIT
A5G20UT(SEMS-SW PAN
BLACK_NI + M4X20.0)
(approx.
8.7±0.9lb·in)
*
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Stand
Assembly
D1 4(S-1) ---
[2]
AC Cord
Cover
D1 4(S-2) ---
[3]
Rear
Cabinet
Assembly
D2
W1
7(S-3), 13(S-4),
13(L-1), CN601,
CN1101, CN3501
*5
,
CN3901
*5
, CN3013
*6
,
CN3101
*6
1
[4] Speaker
D3
W1
4(S-6), CN3801,
Speaker Holder
---
[2] AC Cord
Cover
[3] Rear Cabinet
Assembly
[8] Function
CBA Unit
[7] Rear Cabinet
[4] Speaker
[1] Stand
Assembly
[6] Stand Bracket
[9] LCD Panel
Assembly
[10] IR Sensor
CBA Unit
[11] Front Cabinet
[5] Digital Main
CBA Unit
[5]
Digital Main
CBA Unit
D3
W1
6(S-7), Earth Spring ---
[6]
Stand
Bracket
D3 2(S-8) ---
[7]
Rear
Cabinet
D3 --------------- ---
[8]
Function
CBA Unit
D4
W1
CN4001, Knob Frame,
Function Knob, Hook
2
[9]
LCD Panel
Assembly
D4 --------------- ---
[10]
IR Sensor
CBA Unit
D4
W1
Sensor Shield, Hook 2
[11]
Front
Cabinet
D4
Decoration Plate, LED
Lens
*5 *7
, Leading
Edge Cover
*5 *7
,
Hook
*5 *7
3

(1)

(2)

(3)

(4)

(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal Note