7-2 PL15.01FW
10. When the firmware update is completed, the
following will appear in the screen.
Remove the USB storage device from the USB
port.
Turn the power off and turn the power on again.
11. Updating software is started, the following will
appear in the screen.
12. After finished the updating software, TV set will
automatically reboot.
"
*
" differs depending on the models.
Software update is successful.
Please remove the USB storage device and restart the TV set.
Software update
1324
UPGRADING SOFTWARE
8%
PLEASE DO NOT TURN OFF
To Next Page
Loading...
