Service Modes, Error Codes, and Fault Finding
EN 54 TPM14.2E LA5.
2014-Sep-26
back to
div. table
Table 5-2 Factory mode overview
Item Item value
Default value
Description32" 40" 42" 47" 48" 55" 58" 65"
0 F/W VERSION Press OK Displays the software versions of the supplier, Flash PQ, Smart
Picture, BL Dimming, Source Meter, the Picture Quality
checksum, the Dimming library, the Source meter library, the
Flash AQ, the MTK, MCU and OAD software versions.
1 PANEL_ID See table 6-3 Display code overview Displays and changes the Panel ID with the left and right cursor;
be careful changing this, it can result in not correct displaying
the screen!
2 TUNER_ID 5 5 5 5 5 5 5 3 Displays and changes the Tuner ID with the left and right cursor.
Not to be changed when the tuner is replaced with the correct
service part.
3 DEMOD_TYPE 3 0 3 3 3 3 1 4 Choose demod type.
4 ERR Code: xxx xxx xxx
xxx xxx
000 000 000 000 000 Values showing the last 5 errors during the last 50 hours of
operation, according to table 5-4 Error code table
5 CLEAR ERROR BUFFER Press OK Selecting this clear all current error codes.
6 NVM ADDRESS 0 NVM address 0 to 8191, Use Item 6 to change and 7 to store the
data to the correct NVM address
7NVM VALUE 0 Displays the value at the NVM address of item 5
8 NVM STORE Press OK Use this option to save the data of item 6 to NVM address of item
5
9 NVM COPY TV to USB Press OK Use this to store the NVM data to the REPAIR folder of a FAT
formatted USB memory stick. The TV will write two files in the
REPAIR folder of the memory stick. It will create this folder if it
does not exist. The items are “Channel list”, “Personal settings”,
“Option codes”, “Display-related alignments” and “History list”.
In case the download to the USB stick was not successful
“Failure” will appear. In this case, check if the USB stick is
connected properly. Now the settings are stored onto the USB
stick and can be used to download onto another TV or other
SSB. Uploading is of course only possible if the software is
running and if a picture is available. This method is created to be
able to save the customer’s TV settings and to store them into
another SSB.
10 NVM READ USB to TV Press OK Use this to store the NVM data from the USB memory stick to
the TV. The TV will save the two files which were created in item
8 to the NVM of the set. Use these options when replacing a
SSB. When “USB to TV Success” is displayed remove the
power and restart the TV
11 RESET_PBS_PWD Press OK Use this to reset the Child Lock
12 DIM_LIB RESET Press OK Reset the Dimming
13 SRC_METER RESET Press OK Reset the Source meter
14 AMBLIGHT RESET Press OK Reset Ambilight
15 ACFG RESET Press OK Reset ACFG
16 CIPLUS QUERY Press OK Shows the Validity of the CI+ key and the supplier information
17 CIPLUS UPDATE Press OK Used to enter a new CI+ code into the NVM. This can only be
used when no CI+ code exists in the NVM
18 EDID UPDATE Press OK Used to enter a new EDID codes into the NVM
19 TEST PATTERN Press OK With the “left” and “right” keys of the remote control various test
patterns can be chosen
20 VIRGIN_MODE Off Use this to return the set to virgin mode. Depends whether the
set has been used already.
21 E-Fuse On E-fuse mode
22 ORT_MODE Off ORT mode
23 VGA_UART_SWITCH Off When switched “on” the VGA port can be used for UART
logging.
24 DRMWARNING Off Off Off On On On On On Warning the data rights management
25 AGEING MODE Off Use this for aging a new LCD panel
26 CLR_TEMP_R 255 Red colour temperature setting
27 CLR_TEMP_G 255 Green colour temperature setting
28 CLR_TEMP_B 255 Red colour temperature setting
29 AUTO_COLOR Press OK PC: any pattern that has black and white, YPbPr: SMPTE bar
(colour bar), any timing.
30 ADC_GAIN_R 146 0 0 83 0 0 0 0 Red ADC gain
31 ADC_GAIN_G 145 0 0 81 0 0 0 0 Green ADC gain
32 ADC_GAIN_B 138 0 0 80 0 0 0 0 Blue ADC gain
33 ADC_OFFSET_R 134 128 128 88 128 128 128 128 Red ADC offset
34 ADC_OFFSET_G 132 128 128 81 128 128 128 128 Green ADC offset
35 ADC_OFFSET_B 200 128 128 86 128 128 128 128 Blue ADC offset
36 YPBPR_PHASE 20 InValid InValid InValid InValid InValid InValid InValid Not available for this chassis
37 AUD_GAIN_LINEIN 0 Line-in audio gain
38 AUD_GAIN_HDMI 0 HDMI audio gain
39 AUD_GAIN_ATV 0 Analogue TV audio gain
40 AUD_GAIN_DTV 0 Digital TV audio gain
41 AUD_GAIN_USB 0 USB audio gain
42 AQ_INDEX 11 9 3 3 9 4 15 5 Audio Quality index
43 AUDIO TEST MODE Off Used for audio testing during production
44 AUDIO CHANNEL TYPE 2.0 2.0 0.0 0.0 2.0 2.0 0.0 0.0 Defines the installed speaker system
45 AUDIO SRA Off Audio SRA
To Next Page
Loading...
