Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the
list.The list will be removed automatically after 6 seconds or press
OK to remove immediately.
DVD/R CBL TV VCR AUX
Press the SELECT button
repeatedly to select one of the
system modes in which the remote
control can be used. If no action is
being undertaken within 60 seconds,
the remote control returns to TV
mode.After an action in the
selected system mode the remote
control will remain in this mode for
60 seconds and will then return to
TV mode.
A/CH
Press to alternate between the
currently viewed channel and the
previously viewed channel.
DEMO Demo menu on/of
See p. 13.
CLOCK on/off
Time display (for max. 10 minutes)
Color buttons
When functions are attached to the
color buttons, the color buttons are
shown on screen.
= MY CONTENT
Press to display the My content
menu on or off, see p. 11.
SWIVEL button
To control the motorized swivel
combination with the cursor
buttons. See p. 7.
OK - to activate a setting;
- to display the list of channels
stored (according to the selection
made in the Installation mode -
Antenna or Cable, p. 14);
- starts playing content in the Multi-
media browser application, p. 46;
- TV Guide On Screen operation,
see p. 35.
MENU - Settings menu on/off,
see p. 12.
- TV Guide On Screen operation,
see p. 35.
VOL Volume
Press + or - to adjust the volume.
POWER
Press to turn on/off the TV from or
to standby mode.
The TV is never powered off completely
unless it is physically unplugged.
TV GUIDE on/off. See p. 35.
INFO
- Display information: Press to display
information (when available) about
the selected TV channel and
program or accessory device.
- TV Guide On Screen operation,
see p. 35.
Cursor buttons
Press the cursor buttons up/down,
left/right to navigate through the
menus.
Note: If necessary, you can adjust the
picture position to the center of the
screen with the cursor keys.
PIP HDMI Dual screen/PIP
To watch a broadcast and a HDMI
source simultaneously. See p. 18.
MUTE
- Interrupt the sound or restore it.
CH/PAGE Channel selection
-To browse through the TV channels
or sources stored in the preferred
channel list. See p. 34.
-To select between Antenna or Cable
TV channels, first make your
selection in the Settings menu,
see p. 14.
Note:You don’t have to start the
installation again once you have
searched for and stored the available TV
channels.
- TV Guide On Screen operation,
see p. 35.
- Type the dash (-) for digital channels.
AV+ Press repeatedly to select AV1,
AV2, AV3, HDMI1, HDMI2, Side or
TV channels, when in TV mode,
according to where you connected
the accessory devices. See p. 60.
Use of the remote control RC4308
To Next Page
Loading...
