Philips 42HFL5682D/F7 - FCC Compliance Notice; FCC Rules for Digital Devices; Canadian Notice; Canadian Equipment Regulations

Technical Specifications and Connections
EN 5TPB1.2HU LA 2.
2011-Mar-11
4-n.c.
5 - Ground Gnd H
6 - Ground Red Gnd H
7 - Ground Green Gnd H
8 - Ground Blue Gnd H
9-+5V
DC
+5 V j
10 - Ground Sync Gnd H
11 - Ground Red Gnd H
12 - DDC_SDA DDC data j
13 - H-sync 0 - 5 V j
14 - V-sync 0 - 5 V j
15 - DDC_SCL DDC clock j
3 - Audio - In: Left / Right, VGA
Gn - Audio L/R in 0.5 V
RMS
/ 10 kW jq
4 - USB2.0
Figure 2-4 USB (type A)
1-+5V k
2 - Data (-) jk
3 - Data (+) jk
4 - Ground Gnd H
5 - HDMI: Digital Video, Digital Audio - In
Figure 2-5 HDMI (type A) connector
1 - D2+ Data channel j
2 - Shield Gnd H
3 - D2- Data channel j
4 - D1+ Data channel j
5 - Shield Gnd H
6 - D1- Data channel j
7 - D0+ Data channel j
8 - Shield Gnd H
9 - D0- Data channel j
10 - CLK+ Data channel j
11 - Shield Gnd H
12 - CLK- Data channel j
13 - n.c.
14 - n.c.
15 - DDC_SCL DDC clock j
16 - DDC_SDA DDC data jk
17 - Ground Gnd H
18 - +5V j
19 - HPD Hot Plug Detect j
20 - Ground Gnd H
2.3.2 Rear Connections
6 - Cinch: Audio - Out
Rd - Audio R 0.5 V
RMS
/ 10 k kq
Wh - Audio L 0.5 V
RMS
/ 10 k kq
7 - Cinch: Video CVBS - In, Audio - In
See
1 - Cinch: Video CVBS - In, Audio - In
8 - EXT2: Video YPbPr - In, Audio - In
Gn - Video - Y 1 V
PP
/ 75 W jq
Bu - Video - Pb 0.7 V
PP
/ 75 W jq
Rd - Video - Pr 0.7 V
PP
/ 75 W jq
Rd - Audio R 0.5 V
RMS
/ 10 k kq
Wh - Audio L 0.5 V
RMS
/ 10 k kq
9 - RJ11: Data1 - In/Out
1 - SPI Clock TTL out k
2 - SPI Data in TTL in j
3 - +5V Vcc j
4 - SPI Data out TTL out k
5 - GND Gnd H
6 - IR_data TTL out k
10 - Cinch: S/PDIF - Out
Bk - Coaxial 0.4 - 0.6V
PP
/ 75 ohm kq
11 - HDMI1: Digital Video, Digital Audio - In
See
5 - HDMI: Digital Video, Digital Audio - In
12 - Mini Jack: PENDANT CONTROL OUT (8 W / 2 W -
Output)
1 - Control Signal OUT- kq
2 - Control Signal OUT+ kq
3 - Control Signal OUT+ kq
13 - Mini Jack: Bathroom speaker (8 W / 1 W - Output)
1 - Control Signal OUT- kq
2 - Control Signal OUT+ kq
3 - Control Signal OUT+ kq
14 - Service Connector (RS232-UART)
Figure 2-6 Service Connector
1 - DCD Carrier Detect j
2 - RxD Receive j
3 - TxD Transmit k
4 - DTR Data Terminal Ready k
5 - Gnd Ground H
6 - DSR Data Set Ready j
7 - RTS Request To Send k
8 - CTS Clear To Send j
9 - RI Ring Indicator j
15 - RJ45: Ethernet - In/Out
Figure 2-7 Ethernet connector
1 - TD+ Transmit signal k
2 - TD- Transmit signal k
3 - RD+ Receive signal j
4 - RD- Receive signal j
5 - CT Centre Tap: DC level fixation
6 - CT Centre Tap: DC level fixation
7 - GND Gnd H
8 - GND Gnd H
16 - TV ANTENNA - In
Signal input from an antenna, cable or satellite.
2.4 Chassis Overview
Refer to 9. Block Diagrams for PWB/CBA locations.
1 2 3 4
10000_022_090121.eps
090121
10000_017_090121.eps
090428
19
1
18 2
1
6
9
5
10000_005_090121.eps
090121
1123 45678
10000_025_090121.eps
090121