8
3 Installation
Smart Installation
In the 1st time (Virgin) installation, the OSD will instruct you
step by step to do the TV installation setting.
1. Please Select Your Language
• Choose a language and press to select and
proceed to the next step.
2. SmartInstall – Initial Wizard
• In the option, you can choose either “Skip” or
“Continue” to continue the Smart Install.
• In the fi rst time set up, choose “Continue” option and
press to enter the next step
3. SmartInstall – Connection to Paid-Per-View System
• In the option, you can choose “Yes” or “No” to
Connected To PPV System.
• Choose either the “No” option and press to enter
the next step.
• Or for a PPV system installation, choose “Yes”.
The Screen Menu will request for selection of
Communication Type which includes SmatPort (select
No, SPI-5V, SPI-3V3) and Serial Express.
4. SmartInstall – Standalone Proidiom selection
• In the option, you can choose “Yes” or “No” to Using
Standalone Pro:Idiom.
• In the fi rst time set up, choose “No” option and press
to enter the next step.
After above setting is completed, you will enter the following
setting OSD.
To Next Page
Loading...
