Do you have a question about the Philips 42PFL5007G/78 and is the answer not in the manual?
Screen Size | 42 inches |
---|---|
Resolution | 1920 x 1080 pixels |
Display Type | LED |
Smart TV | Yes |
HDMI Ports | 4 |
USB Ports | 2 |
Audio Output | 20W |
Aspect Ratio | 16:9 |
3D | No |
Speakers | 2 |
Energy Efficiency Class | A |
Provides essential technical details and links for product support.
Details the various input/output connectors on the TV.
Details the USB and HDMI connectors on the side.
Details the Ethernet, UART, AV IN, and VGA connectors.
Essential safety guidelines and precautions for repair procedures.
Important warnings for handling components and performing repairs.
Practical advice for avoiding electrical shock and ensuring safety during repair.
Detailed steps for removing the TV's rear cover and panel.
Information on test points and using test patterns for diagnosis.
Overview of Service Default, Alignment, CSM, and ComPair modes.
Service Default Mode (SDM) purpose, specifications, and activation.
Service Alignment Mode (SAM) purpose, specifications, and activation.
Customer Service Mode (CSM) purpose, specifications, and activation.
Introduction and prerequisites for using the ComPair service tool.
Introduction and prerequisites for using the ComPair service tool.
Introduction to error codes and the error buffer.
Methods for reading the error buffer via OSD, LED, or ComPair.
Table of layer 1 error codes and defective devices.
Procedure for identifying errors using LED blinking patterns.
White Tone Alignment procedure and default values.
Block diagram of the MTK5396 SoC.