Philips 43PFG5501 - Game Consoles; Gamepad

4.9
Game Consoles
HDMI
For best quality, connect the game console with a
high-speed HDMI cable to the TV.
Video-Audio L/R
Connect the game console to the TV with a
composite cable (CVBS) and an audio L/R cable to
the TV.
Best Setting
Before you start playing a game from a connected
game console, we advise you to set the TV in the
ideal setting Game.
When you finish playing a game and start watching
TV again, remember to switch the Game or Computer
setting back to Off.
To set the TV to the ideal setting…
1 - Press

, select All Settings and press OK.
2 - Select Picture > Advanced and select Game or
Computer.
3 - Select Off, Game or Computer.
4 - Press

(left) repeatedly if necessary, to close
the menu.
4.10
Gamepad
Connect a Gamepad
To play games from the Internet on this TV, you can
connect a selected range of wireless gamepads. You
can use gamepads with a USB nano receiver or
gamepads with Bluetooth.
To connect a gamepad with a USB nano receiver…
1 - Plug the small nano receiver into one of the USB
connections on the side of the TV. The wireless nano
receiver comes with the gamepad.
2 - If the gamepad is switched on, you can use the
gamepad.
You can connect a second gamepad in the second
USB connection on the side of the TV.
Bluetooth
To connect a wireless gamepad with Bluetooth,
in Help, press the color key

Keywords and look
up Bluetooth, Pairing.
Suitable gamepads
A selected range of wireless gamepads are suited and
tested for use on this TV. Other gamepads might not
be fully compatible.
The suited gamepads are…
• Logitech F710
• Logitech F510
• Xbox 360 Wireless Controller for Windows
• Speedlink Strike FX Wireless Gamepad
• Sony Play Station wired
• Mad Catz C.T.R.L. Mobile Gamepad for Android
• Ipega, PG-9023
• Ipega, PG-9025
• PhoneJoy gamepad
Problems
To solve possible interference with other wireless
devices on TV…
• Use a USB extension cord and move the nano
receiver about 3 feet away from the TV.
• Alternatively, you can use a powered USB hub
connected to the TV and plug the nano receivers into
the USB hub.
18