Philips 46PFL5505D/F7 - Cabinet Disassembly Instructions

4-1 PL10.7DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note
[1]
Stand
Assembly
D1 4(S-1) ---
[2]
Rear
Cabinet
D1 20(S-2), 3(S-3) ---
[3]
Speaker-S D2 2(S-4), Desolder ---
[4]
Speaker
D2
D5
4(S-5), *CN3801,
*CN3802
---
[5]
Stand
Bracket
D2
2(S-6), 8(S-7), 2(S-8),
2(S-9), 3(S-10),*CN1,
AC Inlet Holder
---
[6]
IR Sensor
CBA Unit
D2
D5
*CN4051, *CN4052,
Sheet(Sensor)
---
[7]
Function
CBA Unit
D2
D5
Function Knob,
Knob Frame,
Sheet(Key)
---
[1] Stand
Assembly
[2] Rear Cabinet
[7] Function
CBA Unit
[8] Front Flare
[16] LCD Module
Assembly
[4] Speaker
[5] Stand Bracket
[13] PCB Holder
(D), (U)
[15] Main
Bracket
[14] Wall Mount
Bracket
[17] Front Cabinet
Assembly
[9] Shield Box
[6] IR Sensor
CBA Unit
[3] Speaker-S
[10] Digital Main
CBA Unit
[12] Power Supply
CBA Unit
[11] Jack PCB
Holder
[8] Front Flare D2
13(S-11), 2(S-12),
Boss(T), Boss(W),
Side
Holder
---
[9] Shield Box D3
(S-13), (S-14),
11(S-15), 2(H-1),
Jack Holder(A),
Jack Holder(B)
---
[10]
Digital Main
CBA Unit
D3
D5
6(S-16), *CN3002,
*CN4901, *CN4902
---
[11]
Jack PCB
Holder
D3 2(S-17), ---
[12]
Power
Supply CBA
Unit
D3
D5
11(S-18), *CN4, *CN5 ---
[13]
PCB Holder
(D), (U)
D4 6(S-19) ---
[14]
Wall Mount
Bracket
D4 4(S-20) ---
[15]
Main Bracket D4 10(S-21) ---
[16]
LCD
Module
Assembly
D4 2(S-22) ---
[17]
Front
Cabinet
Assembly
D4 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note