Need help?Do you have a question about the Philips 47HFL5007D/10 and is the answer not in the manual?
Instructions on how to disable the PBS Mode by accessing the setup menu and selecting the OFF option.
Choose the language for the TV interface and on-screen display.
Choose the installation country to apply region-specific settings.
Choose between 'Wall mounted' or 'On a TV stand' for optimal audio/image.
Configure settings for users with visual or hearing impairments.
Initiate the process to scan and install available TV channels.
Rearrange the order of TV channels using the PBS Setup menu and remote control.
Change the name of a TV channel using the 'Options' menu and a virtual keyboard.
Mark channels as hidden in the channel grid; they can be shown again later.
Switch between consumer mode and hospitality mode for TV features.
Assign a Room Identifier for distinguishing different hotel rooms.
Enable, customize, and set timeout for welcome messages.
Configure TV power modes like On, Standby, and Low Power Standby.
Copy TV configuration and channel list data to/from a USB device.
Configure multi-remote control operation for multiple TVs in a room.
Activate channel rings RO (PIN required) and R1 (no PIN) for guest access.
Activate and customize user interface themes with channel references.
How to access the CSM using standard or master remote control sequences.
Procedure to save CSM data as a text file on a USB stick.
Instructions on how to disable the PBS Mode by accessing the setup menu and selecting the OFF option.
Choose the language for the TV interface and on-screen display.
Choose the installation country to apply region-specific settings.
Choose between 'Wall mounted' or 'On a TV stand' for optimal audio/image.
Configure settings for users with visual or hearing impairments.
Initiate the process to scan and install available TV channels.
Rearrange the order of TV channels using the PBS Setup menu and remote control.
Change the name of a TV channel using the 'Options' menu and a virtual keyboard.
Mark channels as hidden in the channel grid; they can be shown again later.
Switch between consumer mode and hospitality mode for TV features.
Assign a Room Identifier for distinguishing different hotel rooms.
Enable, customize, and set timeout for welcome messages.
Configure TV power modes like On, Standby, and Low Power Standby.
Copy TV configuration and channel list data to/from a USB device.
Configure multi-remote control operation for multiple TVs in a room.
Activate channel rings RO (PIN required) and R1 (no PIN) for guest access.
Activate and customize user interface themes with channel references.
How to access the CSM using standard or master remote control sequences.
Procedure to save CSM data as a text file on a USB stick.
General| Screen Size | 47 inches |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Display Technology | LCD |
| Smart TV | Yes |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Audio Output | 20 W |
| Screen Format Adjustments | Yes |
| Contrast Ratio (Typical) | 5000:1 |
| USB 2.0 Ports Quantity | 2 |
| Component Video (YPbPr/YCbCr) In | 1 |
| SCART Ports Quantity | 1 |
| Common Interface (CI) | Yes |
| Common Interface Plus (CI+) | Yes |
| Digital Audio Optical Out | 1 |
| Headphone Outputs | 1 |
| Number of Speakers | 2 |
| Internet TV | Yes |
| VESA Mounting Interfaces | 400 x 400 mm |
| Refresh Rate | 50 Hz |
| Built-in Wi-Fi | Yes |
| Energy Efficiency Class | A |
| Viewing Angle, Horizontal | 176 degrees |
| Viewing Angle, Vertical | 176 degrees |
To Next Page