Do you have a question about the Philips 47PFL7008S/60 and is the answer not in the manual?
Screen Size | 47 inches |
---|---|
Resolution | 1920 x 1080 pixels |
Display Type | LED |
Smart TV | Yes |
HDMI Ports | 4 |
USB Ports | 3 |
Wi-Fi | Yes |
Ethernet | Yes |
Audio Output | 20 W |
3D | Yes |
Ambilight | Yes |
Refresh Rate | 400 Hz |
Digital signal format system | DVB-C, DVB-S2, DVB-T |
Diagram illustrating all physical input and output connectors on the TV.
Essential safety regulations and checks required for repair.
Guidelines for schematic interpretation, BGA ICs, spare parts, and lead-free soldering.
Guidelines for safely placing the TV set for measurements and alignments.
Step-by-step instructions for removing internal assemblies and panels.
Explanation of Service Default Mode (SDM) and Service Alignment Mode (SAM).
Details error codes, their buffer management, and related procedures.
Procedure for diagnosing errors using front LED blinking patterns, covering Layer 1 and Layer 2 errors.
Tips for fault finding, including CSM, power, UART logging, and memory tests.
Instructions for upgrading TV software, including automatic and manual USB methods.
Specifies environmental and electrical conditions for performing alignments.
Procedure for adjusting white point settings using screen patterns and analyzers.
Procedure for resetting NVM on a repaired SSB and re-entering service type/production code.
Circuit diagram and PWB layout for the HDMI connectors and related circuitry.