To Next PageTo Next Page
Need help?Do you have a question about the Philips 47PFL6057K/12 and is the answer not in the manual?
Details of product specifications and online support links.
Overview and detailed pin descriptions of all TV connectors.
Mandatory safety regulations and procedures for performing repairs.
Important warnings regarding electrostatic discharge and high voltage.
Alphabetical list of abbreviations used in the manual.
Illustrations showing cable routing for various TV models.
Recommended positions for servicing the TV set safely.
Step-by-step guide for removing the rear cover and panel.
Instructions for re-assembling the TV set after repair.
Information on key test points for diagnostic measurements.
Description of Service Default Mode (SDM) and Service Alignment Mode (SAM).
Procedure to activate and contents of Customer Service Mode.
Diagrams documenting the TV's start-up sequence and supplies.
Description and ordering information for the ComPair service tool.
Explanation of error codes, their detection, and display methods.
Procedure for interpreting front LED blinks for error diagnosis.
Overview of software-based protection mechanisms.
Practical tips for diagnosing and repairing common faults.
Instructions and flowchart for replacing the SSB.
Procedures for upgrading main and standby software via USB.
Conditions required for performing electrical adjustments.
Procedures for software-based alignments like White Point and Ambilight.
Instructions for setting option numbers and codes.
Mandatory procedure to reset the NVM on a repaired SSB.
Summary table of SAM modes and their functions.
Overview of the chassis architecture and platform.
Layout diagrams identifying components on the SSB.
Description and block diagrams of the power supply units.
Overview of the power architecture and start-up sequence.
Description of the television's back-end processing configuration.
Internal block diagram and pin configuration of the tuner IC.
Block diagram for the 32" 6000 series with 2-sided Ambilight.
Block diagram for the 37" 6000 series with 2-sided Ambilight.
Block diagram for the 42" 6000 series with 2-sided Ambilight.
Block diagram illustrating the video signal path.
Block diagram illustrating the audio signal path.
Block diagram showing control and clock signal distribution.
Block diagram illustrating the I2C communication paths.
Diagram showing the distribution of power supply lines.
Schematic for the Power Supply Unit with Integrated LED Driver (A01).
Top view PWB layout for the Power Supply Unit (A01).
Bottom view PWB layout for the Power Supply Unit (A01).
Schematic for B01A, covering connectors and protection circuits.
Schematic for B02A, the tuner and channel decoder module.
Schematic showing the LVDS fanout for B03A.
Schematic for B05A, the Class-D audio amplifier.
Schematic for B06A, detailing the HDMI interface.
Schematic for B06C, illustrating the USB connectivity.
Schematic for B06F, the NAND-Flash and EEPROM components.
Schematics for various DC-DC converters (B06H, B06I).
Schematic for B06K, the audio processing circuit.
Schematic for B06L, related to conditional access modules.
Schematic for B06N, the serial flash memory.
Schematic for B06Q, detailing control signals and logic.
Schematic for the IR/LED, Light sensor board (B07A).
Schematic for the Infinity sensor module (J).
Schematic for the keyboard control panel (E).
Schematics for 16 LED Ambilight modules (AL1).
Schematics for 13 LED Ambilight modules (AL1, AL2, AL3).
Schematics for 12 LED Ambilight modules (AL1).
Schematics for 10 LED Ambilight modules (AL1).
Schematics for 9 LED Ambilight modules (AL1).
Schematics for 7 LED Ambilight modules (AL1, AL2).
Exploded view of the 32" 6000 series TV assembly.
Exploded view of the 37" 6000 series TV assembly.
Exploded view of the 42" 6000 series TV assembly.
Exploded view of the 42" Infinity series TV assembly.
Exploded view of the 47" 6000 series TV assembly.
Exploded view of the 47" Infinity series TV assembly.
Exploded view of the 55" 6000 series TV assembly.
General