Need help?Do you have a question about the Philips 50 Series and is the answer not in the manual?
Describes the guide's purpose, scope, and content for installing and servicing fetal/maternal monitors.
Details checking packaging for damage before unpacking and inspecting contents upon arrival.
Explains error reporting, board replacement, and the prohibition of component-level repair.
Provides an overview of the monitor's capabilities, inputs, and features like the thermal array recorder.
Specifies acceptable AC voltage and frequency ranges for monitor operation.
Provides step-by-step instructions for adjusting the monitor's voltage selector.
Outlines various mounting options: surface, cart, and top mounting for the monitor.
Covers the process of attaching, connecting, and testing the barcode reader.
Lists tasks for configuring the monitor via buttons or a PC, including time, date, and recorder settings.
Details how to adjust settings like time format, paper format, and language using the monitor's buttons.
Explains the procedure for printing and clearing the monitor's error log using service functions.
Describes how to view and change the monitor's time and date settings using specific keys.
Explains how to adjust the paper speed and FHR paper scale for optimal trace display.
Identifies sockets for peripheral devices on the monitor's rear panel.
Provides instructions and warnings for connecting external devices via dual serial interfaces.
Summarizes available upgrades, their functions, and factory/required steps.
Lists necessary tools and outlines critical safety precautions before beginning an upgrade.
Explains the monitor's system architecture, board interconnections, and signal flow.
Describes the monitor's self-testing procedures upon power-up and during operation.
Details tests like Self Test, Parameter Test, and Quick Test for ensuring monitor performance.
Outlines procedures and requirements for electrical and patient safety testing.
Lists common operator error messages, their causes, and solutions.
Provides a table of service error codes and their corresponding error locations for diagnosis.
Offers a flowchart for troubleshooting issues with the ultrasound parameter.
Lists the necessary tools required for dismantling and reassembling monitor components.
Provides step-by-step instructions for safely removing the monitor's top cover.
Details the procedure for removing and replacing various circuit boards within the monitor.
States the chapter's purpose: replacing items, disassembling the recorder, and parts listing.
Lists essential and useful tools required for servicing the recorder.
Covers procedures for replacing specific recorder components like the thermal line printer head.
Explains how to identify, locate, and order replacement parts from Philips.
Introduces the section on troubleshooting, specifications, and parts for transducers.
Describes the ultrasound transducer's function, specifications, and handling.
Details the Toco transducer's function, specifications, and maintenance advice.
Covers the DECG transducer's specifications, connection, and troubleshooting.
Explains safety symbols and general precautions for the monitor and accessories.
Addresses electrical safety standards, usage supervision, and device classification.
Outlines Philips' warranty terms for hardware and software products.
Lists compliance with safety standards like IEC 601-1 and UL 2601-1.
Provides specifications for operating voltage, temperature, humidity, and dimensions.
Details specifications for NIBP measurement accuracy, ranges, and limits.
General| Brand | Philips |
|---|---|
| Model | 50 Series |
| Category | Medical Equipment |
| Language | English |
To Next Page
