Philips 500 Series User Manual

Troubleshooting
Shaver series 500 – S5588/30
My Philips Shaver is leaking
If you see water leaking from your Philips shaver, there is no need to worry. Find out the possible
causes and solutions to this problem in our article.
There is some water inside your shaver
After cleaning your Philips Shaver or using it in the shower, some water may settle between its
inner body and the outer shell. This water seeps out by itself over time and it may seem like the
shaver is leaking.
However, please be assured that the inner body of your shaver is completely waterproof. This
means that the water cannot reach the machinery of your shaver. You can continue to use your
shaver without any trouble.
To avoid this issue, always shake off your shaver after washing it and le tit completely air dry
before use.
My Philips Shaver is not working
If your Philips Shaver is not working or turning on, read below the possible causes and our
advice on how to solve them yourself.
Your Philips Shaver is not charged
If you have a rechargeable Philips Shaver, it is possible, that its battery has run out. We advise
you to charge your shaver and then try turning it on again. For details on how to charge your
shaver, please refer to the user manual.
If your Philips Shaver is not rechargeable then it should be plugged into a working electric
socket while in use.

Philips 500 Series Specifications

General

Shaving System	ComfortCut Blade System
Battery Type	Li-ion
Charging Time	1 hour
Wet & Dry	Yes
Cleaning	Fully washable
Automatic Voltage	100-240 V
Floating Heads	Yes
Cordless Use	Yes
Quick Charge	5 minutes for 1 shave
Display	Battery indicator

Summary

My Philips Shaver is leaking

Water inside shaver

Water settling between inner body and outer shell; normal operation. Ensure shaver is dry.

My Philips Shaver is not working

Shaver not charged

Battery depleted; charge shaver or use plugged in. Refer to manual for charging details.

Shaver is dirty

Blocked shaving heads due to hair/dirt; clean shaver thoroughly. Check cleaning reminder.

Shaver not assembled correctly

Incorrect assembly can cause malfunctions; refer to user manual for reassembly.

Travel lock activated

Travel lock prevents operation; deactivate by holding power button for 3-5 seconds.

Shaver is damaged

Severe damage may prevent motor function; contact support for further assistance.

My Philips Shaver is not giving good results

Shaver performance decline due to dirt

Dirty shaver reduces performance; clean heads & inside. Check cleaning reminder.

Incorrect assembly affecting performance

Incorrect assembly affects performance; refer to user manual for reassembly.

Shaving technique and movements

Use slow, circular movements for optimal results. Motion-sensor models assist.

Skin adjustment period

New users may experience irritation; allow 2-3 weeks adjustment. Use moisturizer.

Pre-trimming long facial hair

Trim long hair before shaving for comfort and efficiency. Use attachment or trimmer.

Shaving pressure and gentleness

Gentle pressure reduces irritation and improves shaving. Avoid pressing too hard.

My Philips Shaver is making a loud noise

Shaver not assembled correctly

Not assembled correctly can cause rattling noise; reassemble shaver per user manual.