39
10. Troubleshooting & FAQs
lock status as shown below
illustrators.
Q13: Why the fonts are indisctinct?
Ans.: Please follow the process on
page 29 to improve it.
Q14: Where can I find Important
Information manual mentioned
in EDFU?
Ans.: Important Information manual
can be download on the Philips
website support page.
10.3 Multiview FAQs
Q1: How to listen to Audio,
independent of video?
Ans.: Normally the audio source is
linked to the main picture source.
If you want to change audio-
source input , you can press
to enter OSD menu. Select your
preferred [Audio Source] option
from the [Audio] main menu.
Please note that the next time
you turn on your display, the
display will by default select
the audio source you chose last
time. In case you want to change
it again, you need to go through
the above steps to select your
new preferred audio source,
which then will become the
“default” mode.
Q2: Why the sub-windows flickers
when I enable PBP.
Ans: It’s because the sub-windows
video source is interlace timing
(i-timing), please change sub-
window signal source to be
progressive timing (3P-timing).
To Next Page
Loading...
