To Next PageTo Next Page
Need help?Do you have a question about the Philips 55PFL6188K/12 and is the answer not in the manual?
General| Screen Size | 55 inches |
|---|---|
| Display Technology | LED |
| Smart TV | Yes |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Wi-Fi | Yes |
| Ethernet | Yes |
| Display diagonal | 139 cm |
| Screen shape | Flat |
| Aspect ratio | 16:9 |
| 3D | No |
| Built-in speaker(s) | Yes |
| Number of speakers | 2 |
| RMS rated power | 20 W |
| Internet TV | Yes |
| Component video (YPbPr/YCbCr) in | 1 |
| USB 2.0 ports quantity | 3 |
| Common interface (CI) | Yes |
| Common interface Plus (CI+) | Yes |
| Digital audio optical out | 1 |
| Headphone outputs | 1 |
| SCART ports quantity | 1 |
| VESA mounting | Yes |
| Product color | Black |
| Weight | 14.2 kg |
| 3D technology | No |
| Operating System | Android |
| Bluetooth | No |
| Motion interpolation technology | Perfect Motion Rate |
| Dynamic contrast ratio marketing name | Dynamic Contrast |
| Width | 1237 mm |
| Width (with stand) | 1237 mm |
| Digital signal format system | DVB-T, DVB-C, DVB-S2 |
| Resolution | 1920 x 1080 pixels |
| Audio Output | Digital audio optical out, Headphone out |
Overview of technical specifications and online product support.
Overview of side and rear connectors for the TV.
Safety regulations and procedures for repair.
Notes on schematic values, spare parts, BGA ICs, lead-free soldering.
How to place the TV for easy servicing.
Procedure for removing the assembly or panel.
Steps for re-assembling the TV set in reverse order.
Overview of Service Default, Alignment, and Customer Service Modes.
Explanation of error codes and how they are logged.
Methods to clear the error buffer in SAM or CSM.
Procedure for blinking LED error indication.
Overview of software protections and fault conditions.
Guidelines for UART logging and interpreting data.
Troubleshooting power supply issues and cable handling.
Checking and changing the display option code.
Step-by-step instructions for SSB replacement.
Automatic software upgrade process.
Conditions for performing electrical adjustments.
Software-based alignment procedures.
Alignment of white point for LCD screens.
Communication between microprocessor and I2C ICs.
Resetting NVM on repaired SSB and setting service type.
Overview of SAM modes available for service.
Information on power supply units and ordering new boards.
Power architecture overview.
Block diagram and pinning information for the decoder IC.
SSB details.
Power connector circuit diagram.
AmbiLight details.
AmbiLight details.
AmbiLight details.
AmbiLight details.
AmbiLight details.
AmbiLight details.
AmbiLight details.
AmbiLight details.
AmbiLight details.
Q LED panel circuit diagram.
9 LED Everlight circuit diagram.
9 LED Everlight circuit diagram.
9 LED LiteOn circuit diagram.
8 LED LiteOn circuit diagram.
6 LED LiteOn circuit diagram.
9 LED Everlight circuit diagram.
9 LED LiteOn circuit diagram.
8 LED LiteOn circuit diagram.
9 LED LiteOn circuit diagram.
7 LED LiteOn circuit diagram.
Sensor Module details.
RF4CE Sensor Module circuit diagram.
Wireless LAN, USB, light sensor, IR/LED module details.
QFHD sensor board details.
Keyboard Control Module details.
Amplifier panel details.
Power section of the amplifier panel.
Amplifier circuit diagram.
SSB details.
SSB details.
