time information comes from the broadcasted UTC -
Coordinated Universal Time information.
• If the clock is not correct, you can set the TV clock
to Country dependent.
• When select Country dependent, you can set the time
for Automatic, Standard time, or Daylight saving time.
Correct clock manually
(Home) > Settings > Region and
language > Clock > Auto clock mode > Manual
(Home) > Settings > Region and
language > Clock > Date, Time
Go to previous menu, and select Date and Time to adjust
the value.
Note:
• If none of the automatic settings display the time
correctly, you can set the time manually.
• The Auto clock mode setting will be back to Automatic
after the TV power is turned off and on again.
Set time zone or set a time offset for your region
(Home) > Settings > Region and
language > Clock > Time zone
Select one of the time zones.
Set the TV to switch to Standby automatically after a
preset time
(Home) > Settings > Region and
language > Clock > Sleep timer.
Set the TV to switch to Standby automatically after a
preset time. With the slider bar you can set the time to
up to 180 minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off. You can always
switch off your TV earlier or reset the time during the
countdown.
43
To Next Page
Loading...
