Switch On to Bluetooth® Audio
Switch on to allow this TV to be switched on
to Bluetooth® Audio (Screen Off mode) from your
mobile's Bluetooth® paired device list.
To switched on to Bluetooth® Audio…
1 - Select Settings > Wireless and Networks and
press OK.
2 - Select Bluetooth > Switch on to Bluetooth
Audio and press OK.
3 - Select On and press OK to confirm.
4 - Press (left) repeatedly if necessary, to close
the menu.
Once a Bluetooth® device is paired, select the device
from Sources list to launch the Bluetooth® Audio
player. You can play audio files on connected device
and the sound will be played on TV speakers. Audio
volume can be controlled via remote
control Volume + / - buttons or via device media
controls.
While playing audio files with Bluetooth® Audio
player, more options are available to set.
• Screen off – select to turn screen off while playing
audio file.
• Ambilight on/off* – select to turn on or off the
Ambilight.
• Disconnect – select to disconnect the device.
* Ambilight setting is only for models which support
Ambilight function.
8.6
Headphones
You can connect a set of headphones to
the connection on the back of the TV. The
connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
To adjust the volume…
1 - Press Volume , select the headphones icon
by arrows (left) or (right).
2 - Press the arrows (up) or (down) to adjust
the volume.
8.7
Game Console
HDMI
For best quality, connect the game console with a
Ultra High Speed certified HDMI cable to the TV.
8.8
USB Hard Drive
What You Need
If you connect a USB Hard Drive, you can pause or
record digital TV broadcasts (DVB broadcasts or
similar).
Minimum Disk Space
• To Pause
To pause a broadcast, you need a USB 2.0
compatible Hard Drive with a minimum of 4GB disk
space.
• To Record
To pause and record a broadcast, you need a
minimum of 250GB disk space.
For more information on how to install a USB Hard
Drive, in Help, press the colour
key Keywords and look up USB Hard Drive.
Installation
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
25
To Next Page
Loading...
