Philips 7 Series - Page 11

<43” – 55”>
1
2
3
Cover a table top with a cloth or blanket to avoid damage
to the TV screen. Hold both sides of the TV set to place on
the table.
Note(s)
●
Carefully lay the TV set, with the screen side down, on the front
cardboard as shown in the figure.
4
Fasten the stands to the TV with 4 screws (included).
×
2
×
2
Note(s)
While fastening the screws, hold the stand to prevent it from falling.
5
Both stands now be securely fastened.
Note(s)
●
A wide open space is recommended for assembly.
●
A
Phillips-head screwdriver is required to fasten the stands to the TV set.
●
When attaching the stand, ensure that all screws are tightly fastened. If
the stand is not properly attached, it could cause the unit to fall, resulting
in injuries as well as damage to the unit.
●
To remove the stand from this unit, unscrew the phillips-head screws by
reversing the procedure. Be careful not to drop the stand when you
remove it.
6
Carefully lift the TV set as shown in the illustration and
place it onto a stable, level surface.
11 .English
Back to Contents