Philips 7000 Setie - Product Specifications

18 19ENEN
4 Product
specifications
Note
• Specications and design are subject to change
without notice.
Amplier
AC output power (RMS) 80 W
AC output power
(maximum)
160 W
Battery output power 30 W
Frequency response
40Hz-20KHz,
±3dB
Signal to noise ratio ≥ 65 dBA
Total harmonic distortion < 10%
Speaker
Speaker impedance 4 ohm + 8 ohm x 2
Sensitivity 91 dB ±3dB/m/W
Bluetooth
Bluetooth version V 5.0
Bluetooth
frequency band
2.402 GHz ~ 2.480
GHz ISM Band
Transmitter power ≤10dBm
Bluetooth range 30 m (free space)
Streaming format: AAC, SBC, music
streaming (A2DP), Playback/volume control:
AVRCP Multipoint (Multipair) support
USB
USB direct version 2.0 Full Speed
USB output 5V, 0.5A
Extension Codec Sample Rate Bitrate
.mp3
MPEG 1
Layer 1
16 ~ 48 kHz 32 ~ 448 kbps
MPEG 1
Layer 2
16 ~ 48 kHz 8 ~ 384 kbps
MPEG 1
Layer 3
16 ~ 48 kHz 8 ~ 320 kbps
MPEG 2 /
MPEG 2.5
Layer 1
16 ~ 48 kHz 8 ~ 256 kbps
MPEG 2 /
MPEG 2.5
Layer 2
16 ~ 48 kHz 8 ~160 kbps
MPEG 2/
MPEG 2.5
Layer 3
16 ~ 48 kHz 8 ~ 160 kbps
.wav
WAV 16 ~ 48 kHz
Up to 1536
kbps
.wma
WMA 8 ~ 48 kHz 5 ~ 320 kbps
.ac
FLAC
Up to 48 kHz /
16 bit
Battery
Battery capacity
14.4V, 2600mAh
(Built in rechargeable)
Battery life 12 hrs
Battery charge time 6.5 hrs
General information
AC power
100-240V~
50/60Hz, 35W
Eco standby fewer
consumption
≤ 0.5W
Dimensions
(WxHxD)
300x310x300 mm
Weight 7.5 kg
Operating
Temperature
0°C - 45°C