Unpacking
It is recommended that two or more people remove the TV set from
the box. Be careful not to injure your fingers and keep children away
during assembly.
1
Open the top flaps of the box.
2
Remove all accessories and an styrofoam board.
Caution(s)
Ɣ
DO NOT take the TV set out of the box yet.
3
Remove the packing joints from the box.
4
Remove the outer slipbox with care.
5
Unfold the left and right side of the bottom packaging.
6
Remove the left and right side of the polystyrene foams.
Installing the stands
1
Remove both of the bottom polystyrene foam bases. Carefully
tear the plastic bag until the bottom corner of the TV is exposed.
Ɣ
Support the top of the TV set at all times to prevent the TV from
falling.
Caution(s)
Ɣ
Before installing the matching stand, remove the protective cardboard and
carefully peel away the film from the area so that it will not get stuck between
the unit and the stand.
2
Lift up one side of the TV approx. 1 inch (2.5 cm) and insert the
matching stand upward until it fits the main unit.
9 .English
Continued on next page.
To Next Page
Loading...
