No Signal Auto Power Off
MENU > TV options > Advanced Options > No signal
auto power off.
Press Navigation keys up or down to set the value. Select
Off to deactivate the automatic switch off.
* If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not use the
remote control of the TV, you should deactivate this
automatic switch off, to set the value to Off.
Default Channel
MENU > TV options > Advanced Options > Default
Channel.
Set the default channel mode.
HBBTV Settings
Note: This is for Singapore, Australia, Malaysia and New
Zealand only.
MENU > TV options > Advanced Options > HBBTV
Settings.
Switch on HbbTV
HBBTV settings > HBBTV Support.
Set the HbbTV History Tracking
HBBTV settings > Do Not Track.
Set the options according to your preference.
Set the HbbTV Cookies
HBBTV settings > Cookie Settings.
Set the options according to your preference.
Set other options
HBBTV settings > Persistent Storage, Block Tracking Sites,
or Device ID.
Select one of the options and switch it to on or off.
Reset HbbTV Device ID
HBBTV settings > Reset Device ID.
You can reset your TV unique device identifier. A new
identifier will be created. This will replace your Device ID
with a new identifier.
OAD
MENU > TV options > Advanced Options > OAD.
Set the Over-the-air software update auto download to
on or off.
Note: OAD is for Thailand, Malaysia, and Vietnam only.
System Information
MENU > TV options > Advanced Options > System
information.
To check the system information, including Signal level,
Frequency, Service ID, and etc.
Open Source Licenses
MENU > TV options > Advanced Options > Open
Source Licenses.
To view the open source licenses information.
33
To Next Page
Loading...
