Philips 8115 Series - Software; Update Software; Software Version; Open Source Licenses

19
Software
19.1
Update Software
Local Update
You need a computer with an high-speed Internet
connection and a USB flash drive to upload the
software on the TV. Use a USB flash drive with at least
2Gb free space. Make sure that write protection is
switched off.
1 - Press MENU > TV
options > Settings > Device
Preferences > System update > Local Update and
press OK.
2 - Follow the instructions on screen.
Update from Internet
If the TV is connected to the Internet, you may receive
a message to update the TV software. You need a
high-speed (broadband) Internet connection. If you
receive this message, we recommend you to carry out
the update.
1 - Press MENU > TV
options > Settings > Device
Preferences > System update > Internet and
press OK.
2 - Follow the instructions on screen.
Look for OAD Updates
Scan to search for an OAD (Over-the-air Download)
software update.
1 - Press MENU > TV options > Manual OAD
Download and press OK.
2 - Follow the instructions on screen.
Note:
The OAD software update is only available in
selected countries.
Check from the Home page
1 - Press Home.
2 - Select the Notifications icon from the top-right
corner and press OK.
19.2
Software Version
To view the current TV software version…
1 - Select MENU > TV options > Settings > Device
Preferences > About.
2 - The version, release notes and creation date are
shown. Also, the Netflix ESN Number is shown if
available.
3 - Press Back if necessary, to close the menu.
19.3
Open Source Licenses
To view the Open-source licenses…
1 - Select MENU > TV
options > Settings > Channel.
2 - Select Open Source Licenses and press OK.
3 - Press Back if necessary, to close the menu.
44