Although this TV has a very low standby power
consumption, unplug the power cable to save energy if
you do not use the TV for a long period of time.
For more information, in Help, press the colour
key Keywords and look up Switching On for more
information on switching the TV on or off.
2.5. Antenna Cable
Insert the antenna plug firmly into the Antenna socket
at the back of the TV.
You can connect your own antenna or an antenna signal
from an antenna distribution system. Use an IEC Coax 75
Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
2.6. Satellite Dish
Attach the satellite F-type connector to the satellite
connection SAT at the back of the TV.
7
To Next Page
Loading...
Need help?
General