Bottom
1 - (TV Guide) / (LIST)
To open or close the TV Guide. Long press to open the
channel list.
2 - (Volume)
Press + or - to adjust the volume level.
3 - Number keys
To select a channel directly.
4 - TEXT
To open or close Text/Teletext.
5 - (Channel)
Press + or - to switch to the next or previous channel in
the channel list. To open the next or previous page in
Text/Teletext.
6 - (Mute)
To mute the sound or to restore it.
7 - (DASHBOARD)
To launch Dashboard on side of screen to access Settings,
device controls, notifications and more.
3.2. Pair Your Remote Control
to TV
This remote control uses both Bluetooth® and IR
(infrared) to send its commands to the TV.
• You can use this remote control via IR (infrared) for
most operations.
• To use advanced operation like voice search, you need
to pair (link) the TV with the remote control.
When you start the initial TV installation, the TV invites
you to press Home + Back key to pair the remote control.
It is suggested to complete the pairing during the first TV
installation.
Note:
1 - Once the remote control has entered pairing mode
successfully, the LED indicator around the microphone
on the front side of the remote control starts blinking.
2 - The remote control must be kept close to the TV
(within 1m distance) during pairing in order to ensure
success.
3 - If the TV does not launch the voice control field when
press , pairing was unsuccessful.
4 - It is advisable to wait until the set has fully started up
and launched all background processes before pairing
mode is entered as the toast message containing further
instructions may appear too late, thereby negatively
impacting the pairing procedure.
Pairing or pairing again
If the pairing with the remote control was lost, you can
pair the TV with the remote control again.
You can press Home + Back key or long press the PAIR
(SOURCES) key (approximate for 3 seconds) for pairing.
Alternatively, go to Settings > Remote &
accessories > Remote control settings > Pair remote
control, then follow the on-screen instructions.
A message appears when the pairing is successful.
Remote Control Software
Settings > Remote & accessories > Remote control
settings > Remote control info
Once the remote control is paired, you can check the
current remote control software version.
Settings > Remote & accessories > Remote control
settings > Update remote control software
Check available remote control software for updates.
3.3. Voice Search
You can search for videos, music or anything else on the
Internet by simply using your voice. You can speak into
the microphone on the remote control.
You need to pair the remote control to the TV before use
voice search.
To use Voice:
1 - Press and hold the
key on remote control, the blue
light on the remote control lights up and the search field
opens, the microphone is active.
2 - Speak out what you are looking for with clear
pronunciation. Once the voice input is done, release
the
key to start the search. It might take some time for
the results to appear.
3 - In the list of search results, you can select the item you
9
To Next Page
Loading...
Need help?
General