1 Switch off the shaver. Pull the shaving head
holder off the bottom part of the shaving unit.
2 Discard the old shaving head holder and attach
the new shaving head holder to the bottom
part of the shaving unit (‘click’).
3 After replacing the shaving heads, you can reset
the replacement reminder by pressing the
on/off button for 7 seconds. Wait until your
hear 3 beeps.
If you do not reset the replacement reminder,
the shaver resets automatically after 9 shaves.
Replacing the cleansing brush attachment
The cleansing brush attachment should be
replaced every 3 months or earlier if the brush
hairs are bent or damaged (see 'Ordering
accessories').
Storage
Store the shaver in the pouch.
Note: Always let the shaver dry completely before
you store it in the pouch.
31
English
To Next Page
Loading...
