Philips AC0819 - Safety - Cautions

1EN
Productoverview
A Air outlet
B Control panel
C Particle sensor
D NanoProtect lter (FY0914 is for AC0819/
AC0820, FY0293 is for AC0830)
E Base
F 2 Pin plug adapter (KA1801A-2400750EU)
G Power socket
H Power on/o button
Controlsoverview
Filter replacement alert Power on/o button
Mode switch button
Automode
The air purier automatically adjusts the fan speed in accordance with the ambient
air quality.
Turbomode The air purier operates on the highest speed.
Sleepmode The air purier operates quietly at a low speed. After 3 seconds,the screen lights o.
Followtheinstructionstolearnhowtouseproduct
The visual instructions are divided into dierent topics, illustrated by the following graphic icons.
Power on/o Mode switch Maintanence
Filter replacement Storage
Filter reset
Notes
1 Please scan the QR code to read the full detailed User Manual online to better know about
this product.
2 Make sure the purier is unplugged from the electrical outlet before installing the lter.
3 The color of air quality light corresponds to the ambient air quality.
4 The appliance operates in Auto mode by default. The brightness of air quality light reects
the current running mode.
5 Clean the particle sensor with a damp cotton swab.
6 You can also replace the lter before lter replacement alert displays on the screen. After
replacing a lter, you need to reset the lter lifetime counter manually.
Troubleshooting
Please check the troubleshooting at www.philips.com/support when you encounter problems with
the appliance. If you are unable to solve the problem with the information, contact the Consumer Care
Center in your country.
English
EN