6 EN
4 Using the
appliance
Understanding the air
quality light
For AC2887
Air quality light
color
Air quality level
Blue Good
Blue-violet Fair
Red-purple Unhealthy
Red Very unhealthy
For AC2882
Air quality light
color
Air quality level
Blue Good
Blue-violet Fair
Red Unhealthy
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.
3 Getting started
Installing lters
Note
• Make sure that the appliance is
unplugged before installing the filters.
Before using the appliance, remove all
packaging materials of the filters and
place the filters into the appliance as
described as follows.
Note
• Make sure that the side with the tag is
pointing towards you.
1 Remove all packaging materials of
the air purification filters (fig.c).
2 Pull the bottom part of the front
panel to remove it from the
appliance (fig.d).
3 Press the two clips down and pull
the pre-filter towards you (fig.e).
4 Put the unpacked air purification
filters back into the appliance
(fig.f).
5 Put the pre-filter back into the
appliance (fig.g).
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.
6 To reattach the front panel, mount
the panel onto the top of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2) (fig.h).
To Next Page
Loading...
