Philips AC4014/80 - Resetting the Filter Lifetime Counter

18
4 Press and hold the button for
2 seconds.
Note
•
Reset the purier when it is plugged in and
switched on.
• Only replace the lters when you see the light
goes on.
8 Resetting the
filterlifetime
counter
When you replace the lters, it is important
that you also reset the lter lifetime counter
afterwards. This allows the purier to be in sync
with the lter lifetime.
After you have replaced the lters, reset the
lter time:
1 Switch off the purier and unplug it.
2 Replace the air purier lters (see
‘Replace the lters’).
3 Put the plug in the power socket and
switch on the purier again.
EN