Philips ACC2330 - Advanced Configuration; Using the Device Control Center

10 User manual
5 Advanced configuration
Use the Device Control Center to change the
pedal functions of foot controls with USB
connector.
1 Connect the foot control to a free USB port
on the PC.
2 Start the Device Control Center by opening
the Windows start menu and selecting All
Programs > Philips Speech Control > Philips
Device Control Center.
3 Change the function of the pedals according
to your preferences.
1
4 Click the Upload button
2
to save the new
settings.
D Note
The foot control can be reset to its factory
default configuration by clicking the Defaults
button
3
. Click the Upload button
2
to save
the default settings.
1
2 3