Philips AJ100/12 - Product Controls and Setup; Supplied Accessories; Top and Front Panel Controls

English
SUPPLIED ACCESSORIES
– 1X AC 7.5V adapter
(Input: 220-230V ~ 50Hz 30mA, Output: 7.5V 250mA)
TOP AND FRONT PANEL (See
1
)
1 REPEAT ALARM / BRIGHTNESS CONTROL
– switches off the alarm for a 9 minute period
– changes the brightness of the display illumination
– stops SLEEP function
2 DISPLAY – shows clock/alarm times and status of the set
3 ALARM RESET / SLEEP
– stops active alarm for 24 hours
– activates the radio for sleep function
– displays/adjusts/switches off sleep timer
4
ALARM – switches on/off buzzer mode
– displays time
5 RADIO ON/OFF
– switches the radio on/off; displays radio frequency
– switches off sleep timer
6 ALARM – switches on/off radio mode
– displays time
7 RESET – press if the set / display does not react to operation of any button
IFU_AJ100_eur_ENG 2006.11.10 13:42 Page 4