Philips AJ3275D - Advanced Features and Settings; Set Alarm Timer; Select Alarm Sound; Snooze the Alarm

8EN
6 Other features
Set alarm timer
You can set two alarms to ring at different time.
Note
•
Make sure that you have set the clock correctly.
1 Press and hold AL1/AL2 for 2 seconds to
enter alarm setting mode.
» The hour and minute digits blink.
»
or is displayed accordingly.
2 Press - HR/HR + and - MIN/MIN + to set
hour and minute respectively.
3 Press AL1/AL2againtoconrm.
Select alarm sound
For the alarm sound, you can select buzzer, your
last heard radio or played track on the iPod/
iPhone. (Fig. 8)
Tip
•
When alarm time arrives and you are listening to radio
or audio from the iPod/iPhone, buzzer can only be
activated as alarm sound.
• If you have selected iPod/iPhone as the alarm source,
yet no iPod/iPhone is connected, buzzer will sound
when alarm time comes.
Activate/deactivate alarm timer
1 Press AL1/AL2 to view alarm settings.
2 Press AL1/AL2 again to activate or
deactivate the alarm timer.
»
or appears if alarm timer is on and
disappears if it is off.
• To stop alarm, press the corresponding
AL1/AL2.
» The alarm repeats ringing for the next
day.
Snooze the alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine
minutes later.
Set sleep timer
This clock radio can switch to standby mode
automatically after a preset period.
• Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
To deactivate the sleep timer:
• Press SLEEP repeatedly until [OFF] (off)
appears.
15 30 60 90 120
OFF