Philips AJ3400/79 - Connect power; Set time

5 EN
Connect power
Caution
• Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
• Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Note
• The type plate is located at the bottom of the clock
radio.
(Fig. )
c
Set time
Note
• You can only set time in standby mode.
(Fig. )
1
2 sec
2
3
4
d
PRESET/
SET TIME
PRESET/
SET TIME
HOUR
MIN