Philips AJ4200 - Listen to radio; Tune to a radio station; Program radio stations automatically; Program radio stations manually

4 Listen to radio
Tune to a radio station
1 Press RADIO ON/OFF repeatedly to turn on radio.
2 Press TUNING+/- repeatedly to tune to a radio station.
Program radio stations automatically
D Note
You can program a maximum of 20 preset radio stations •
1 Press RADIO ON/OFF repeatedly to turn on radio.
2 Press and hold SET TIME/AUTO SCAN for 2 seconds.
All available stations are programmed in the order of »
waveband reception strength.
The fi rst programed radio station broadcasts automatically. »
To interrupt scan, press » SET TIME/AUTO SCAN .
Program radio stations manully
D Note
You can program a maximum of 20 preset radio stations. •
1 Press RADIO ON/OFF repeatedly to turn on radio.
2 Press TUNING+/- repeatedly to tune to a radio station.
3 Press and hold PRESET +/- for 2 seconds.
“CH“ begins to blink. »
4 Press PRESET +/- repeatedly to select a preset number.
5 Press and hold PRESET +/- for 2 seconds to confi rm.
6 Repeat steps 2-5 to program more stations.