Philips AJ7030D - Selecting Alarm Source; Activating and Deactivating Alarms

Select alarm source
Adjust AL1/2 iPhone·RADIO·BUZZ control to select alarm
source for both alarms.
Note
When alarm time comes, the selected radio, buzzer, or iPod/iPhone •
turns on.
You can only select the same alarm source for Alarm 1/ Alarm2.
•
If iPhone is selected as alarm source, while no iPod/iPhone is •
connected, the clock radio switches to buzzer source instead.
Activate/deactivate alarm timer
1 Press AL1 / AL2 to view alarm settings.
2 Press AL1 / AL2 again to activate or deactivate the alarm
timer.
» or appears if alarm timer is on and disappears
if it is off.
To stop the ringing alarm, press the corresponding
•
AL1 / AL2 .
The alarm repeats ringing for the next day. •
Snooze alarm
When alarm sounds, press SNOOZE .
The alarm snoozes and repeats ringing fi ve minutes »
later.
To adjust alarm interval (in minutes), press SNOOZE
repeatedly.