21 EN
Dock and charge Android-
powered phone
Dock Android-powered phone
To charge your Android-powered phone, you
1 Check the orientation of the micro USB
connector on your Android-powered
phone.
»
it outwards.
2 If necessary, rotate the USB connector on
the docking system, and then place your
Android-powered phone into the dock.
3 Adjust the bumpers on both sides of the
connector to stabilize the phone.
4 Slide the connector to place your phone in
the middle of the docking system.
Note
If the micro USB connector is located at the top, and
your are using Android system of version 2.3 or above,
screen auto-rotation is available.
Use dock extension
If the USB connector on your phone is close
to the edge, the supplied dock extension can
balance the docked phone, as illustrated.
1 Adjust the slide knobs to make both
bumpers at the lowest position.
To Next Page
Loading...
