EasyManua.ls Logo

Philips AS140 - Alarm Management; Set sleep timer; Play audio from an external device; Adjust display brightness

Philips AS140
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24EN
Select alarm source
Note
For alarm sound, you can select buzzer, your last
listened radio chanel, or the latest played track in your
Android-powered device.
Adjust AL1/AL2 RADIO·BUZZ·DOCK
control to select alarm source for both alarms.
Note
If DOCK is selected as alarm source, make sure that
you have docked your device into the docking system.
Activate/deactivate alarm timer
1 Press AL1/AL2 to view alarm settings.
2 Press AL1/AL2 again to activate or
deactivate the alarm timer.
» The alarm icon appears if alarm timer
is on and disappears if it is off.
 To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next
day.
Snooze alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine
minutes later.
Set sleep timer
This docking system can switch to standby
mode automatically after a preset period.
Press SLEEP repeatedly to select the sleep

» When the sleep timer is activated,
appears.
To deactivate the sleep timer
Press SLEEP repeatedly until [OFF] 
appears.
Play audio from an external
device
You can listen to audio from an external device
through this device.
1 Connect the MP3 link cable to:
 the MP3 LINK socket.
 the headphone socket of an external
device.
2 Press SOURCE repeatedly to select MP3
link source.
»
is displayed.
3 Play audio in the external device (see the

Adjust display brightness
Press BRIGHTNESS repeatedly to select
different brightness levels.

Other manuals for Philips AS140

Related product manuals