Philips AS660C/41 - Page 12

190 06 SOd
Clock Setting
Timer Setting
‘The clock will display in 24-hour mode, ¢9.08:90 or 23:59.
1. Press CLOCK,
+ "98:08" stents lashing
2 Sette hour with PRESET ¥ or a.
3 Setthe minute with TUNING I44orP>l .
44 Press CLOCK agein ta store the seting
The clock stars running
Note:
= When a power interuption ocers, the clock settings are
‘erased, and "2°29" wil lash on the display.
‘Setting the Timers
* The system can swith onto TUNER or CD made
‘automaticaly ata preset time. ttcan serve 28 an alarm to
wake you up. After half an hour fom te preset time, the
system will return tothe standby mode.
Before sting the timer, make sue the clock is set correctly.
‘The timer works only ance fo each satin.
‘The volume of the timer willbe atthe last setting
before the set is switched to Standby mode,
6
Timer Setting
1) Press TIMER SET.
Tho Tafa flashes,
2. Press PRESET to solect the desired source.
= The cispay wil switch a follows:
TUNER ~ CD ~ TUNER.
3 Press TIMER SET to confirm your souce selection
~The cispay will show re 20:02" and "20:99"
flashes.
4 Press PRESET W or & to set the hou forthe timer to stat.
5 Press TUNING [44 or>>4 to set the minutes forthe
timor ta start
Press TIMER SET to store the start time.
+ The TIMER is now set.
= The rc lag remains lt
To stop the TIMER
+ Press TIMER ON*OFF onthe set,
= The TIMER snow of,
‘To start the TIMER again
‘© Press TIMER ON*OFF onthe set.
= The display wil show the last set sta time of the
TIMER and its flag.
= The Twer fag semais it
Notes:
1. Ifthe source selected is TUNER, the ast tuned frequency
‘willbe switched on
2. Ifthe source selected is CD, the frst tack ofthe ast
selected disc wil be played. ifthe CD trays are empty, the
TUNER source wil be selected instead,
Maintenance
Cleaning the Cabinet
© Use soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
‘arnmania or abrasives.
Cleaning Discs
‘When a disc becomes diny, clean it with a cleaning cloth
Wipe the ise from the center out.
© Donot use solvents such as benzine, thinner, commercially
available cleaners, or anti-static spray intended for analog
records.
‘+ To ensure good recording and playback quality, clean the
heeds @ and @, the cansten ©, and pressure roller ©)
after every 80 hours of tape operation
‘© Use cotton swab slightly moistened with clesning fluid or
alcohol.
Domagnetizing the heads
‘© Usea demagnetizing cassette available at your dealer.
”
Ole