Using the device
01
Cleaning instructions before use
Remove all packaging from the
device and the lter.
02
Clean the water tank with water or a clean
damp cloth. (Note: Please do not immerse
the device in water.)
03
Fully charge the device until the
button shows constant red light.
04
Check if the sealing ring is intact
on the lter. Install the lter in the
device.
05
Fill the tank with tap water to the max line,
and press the dispensing button to discard
3L of water to ush the device.
06
The device now is ready for use.
Enjoy freshly ltered water.
Control panel
Handle
Water tank
Type-C USB charging port
Type-C USB cable
Flip-top lid
19
To Next Page
Loading...
