Installing B-type adaptors
Applicable for faucet aerators with female thread
(1) Remove the original aerator cap from the tap.
(2) Take out the original adaptor and screw the
matching adaptor (B-type) onto the tap. Use
mini wrench to tighten the adaptor.
(2) Screw the matching adaptor (A-type) onto
the faucet.
(3) Use mini wrench to tighten the adaptor.
Installing C-type adaptor
Applicable for faucets other than A or B with a diameter of 15mm-21mm.
Please prepare a slotted screwdriver in advance before installing
C-type adaptor.
(1) Whether the inner or the outer seal ring of
C-type adaptor is necessary depends on the
dimension of the faucet outlet.
2
To Next Page
Loading...
