Philips AX3303 - Technical Specification

1 - 1
TECHNICAL SPECIFICATION
General
Dimensions (HxD) :23.3x137.5 mm
Weight without batteries :187g
Power supply modes
DC-in socket : 2.5 - 6.0V
Primary batteries (2xLR6) : 2.0 - 3.6V
Rechargable batteries : 2.0 - 3.6V
Battery lifetime
Battery level detection
Current consumption CDDA-playback
Shock resistance
+X/-X direction : ≥2.5 g
+Y/-Y direction : ≥2.5 g
+Z/-Z direction : ≥2 g
Headphone out (measured with 16Ω load, DBB/ESP off)
Output power (THD=10%)
/17 version only : 2x3mW (+1/-3dB)
all other versions : 2x3.5mW (+2/-2dB)
Frequency response (1mW) : 100Hz-20kHz within 6dB
S/N ratio (unwght) : ≥100dB
S/N ratio (A-wght) : ≥75dB (80dB typ.)
THD+N (1kHz, 1mW) : ≤1% (0.2% typ.)
Channel crosstalk (1kHz, w/o load) :≤-24dB (-58dB typ.)
Channel unbalance (-40dB) : ≤5dB
Volume attenuation (1kHz) : >60dB
Dynamic Bass Boost DBB
Measurement setupCD
Use Audio Signal disc SBC429 4822 397 30184
Low pass filterDUT S/N and distortion meter
L
R
i.e. Sennheiser UPM550
with FF-filter
Level meter
i.e. Sound Technology ST1700Bi.e. 4822 395 30204
22kHz
13th order
EGATSBBD
esnopserycneuqerF
zH36 zHk1 zHk01
DBB1
+9dB ± 2dB 0.3dB ± 2dB -1dB ± 2dB
EDOMNOITAREPO
)V5.4(YLPPUSNI-CD )V52.2(YLPPUS.TTAB
edom-yalPA typ.m90
edom-Charge A typ.m160
A typ.m
100
edom-pmuJA typ.m220 A typ.m400A typ.m300
yb-dnatS
A typ.m03
A typ.m100
350µA typ.
A typ.m120
Powersave
ESP=ON
Powersave
ESP=ON
n/an/a
EPYTYRETTAB
≥ 12h
).pyth(
Primary Batteries
2 x LR6
Primary Batteries
2 x AAA
Rechargable Batteries
AY3363
ESP=ON PSM
15
≥ h18
).pyth(
20
≥ h7
).pyth(
9
≥ h4
).pyth(
6
Tbd
Tbd
ytpmeyrettaB
V8.1
Vm05-/001+
V8.1
Vm05-/001+
1kaewyrettaB
+levelytpmeyrettab
V57.0 ± Vm001
+levelytpmeyrettab
V5.0 ± Vm001
2kaewyrettaB
+levelytpmeyrettab
V50.0 ± Vm001
+levelytpmeyrettab
V45.0 ± Vm001
3kaewyrettaB
+levelytpmeyrettab
V3.0 ± Vm001
+levelytpmeyrettab
V3.0 ± Vm001
DETECTION LEVEL
Vbatt. Alkaline
Vbatt. NMH