Philips AZ127/12 - Playing Audio Sources; Playing a CD; Playing from External Devices

7EN
4 Play
Play a CD
Note
•
You cannot play CDs encoded with copyright
protection technologies.
You can play commercially available audio CDs:
• CD-Recordables(CD-R)
• CD-Rewritables(CD-RW)
1 Switch the source selector to AUDIO-IN/
CD.
2 Open the CD compartment.
3 Insert a CD with the printed side facing up
and close the CD lid gently.
» The total number of tracks displays.
4 Press to start play.
» [
] displays.
• To select a track,press
/ .
• To pause CD play, press
.
» [
]ashes.
• To resume CD play, press
again.
• To stop CD play, press
.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Switch the source selector to AUDIO-IN/
CD.
2 Connect an audio cable (3.5mm, not
supplied)to:
• the AUDIO-IN socket on the unit.
• the headphone socket on an external
device.
3 Play the external device (see the device's
usermanual).
Note
•
The AUDIO-IN socket is not for headphones.
• The display panel lights off when the unit plays from the
external device.
Audio-in