AZ 1605 /17 page 11
CD PLAYER
11
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
At maximum of 20 tracks can be stored in the memory.
1 Select the desired track with SEARCH ∞ or §.
2 As soon as the number of the desired track is displayed, press
the PROGRAM button to store the track in the memory.
™
PROGRAM appears in the display and P lights up briefly.
Then, the number of the stored track is shown.
3 Select and store all desired tracks in this way.
You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
™ The display shows all stored track numbers in sequence.
If you try to store more than 20 tracks the display shows F.
If you have selected the tracks in the stop position, press
PLAY·PAUSE 2; .
If you have selected the tracks during CD play, first press STOP 9,
then press PLAY·PAUSE 2; .
From the stop position, press STOP 9.
™ no lights up briefly,
PROGRAM disappears and your program
is erased.
Note: The program will also be erased if you
– interrupt the power supply,
– open the lid, or
– move the
POWER
slider to
TUNER
or
TAPE
.
Erasing the program from the stop position
CD
PROGRAM
Playing the program
CD
PROGRAM
CD
PROGRAM
STOP
SEARCH
PLAY PAUSE
REPEAT
SHUFFLE
PROGRAM
Programming track numbers
English
AZ1605/17 english 8/11/00 10:44 AM Page 11
To Next Page
Loading...
