16
2 To return to normal play, press MODE repeatedly until play mode icons are no
longer displayed.
Tip
Shuffle play cannot be selected when you play programmed tracks.
•
Program play sequence
You can program up to 20 tracks in the desired sequence.
1 In stop mode, press PROG to start to program play sequence.
» [PROG] and [P01] are displayed.
For MP3-CDs: press » - ALBUM + to select an album.
2 Press / to select a track.
3 Press PROG to program the track.
» [PROG] and [P02] are displayed.
4 Repeat steps 2 to 4 to select and program all tracks.
When all 20 tracks are stored, no more tracks can be »
selected and the display shows [FUL].
5 To play program, press .
In stop mode, press and hold
• PROG to browse programmed tracks.
6 To delete program, press in stop mode.
» [CLr]is displayed.
Listen to an external device
You can use this unit to play audio from an external device.
1 Connect the MP3 link cable to
the
• MP3-LINK jack (3.5 mm) on the back of this unit
the audio output jack of the external device.
•
This unit stops the current playback and starts to play the »
audio input from the external device.
EN
To Next Page
Loading...
