Philips BDP5650/77 - Rent Online Videos; Stream Media from an Android Device; Stream Multimedia Via Miracast

8 EN
Rent online videos
Rent videos from online stores through this
player.
What you need
• A high-speed Internet connection to this
player.
• An HDMI connection between this player
and the TV.
• A USB storage device, with at least 8 GB
memory.
Note
• Use a blank USB storage device. Formatting a USB
storage device erases any content on the USB storage
device.
• This service is country dependent.
1 Connect this player to the Internet (see
"Set up a network").
2 Insert a blank USB storage device into the
USB connector located on the rear panel
of this player.
3 Press .
4 Select [Smart TV], and press OK.
» The online services available in your
country are displayed.
5 Select a video store, and follow the
onscreen instructions to rent and watch a
video.
» The video is downloaded to the USB
storage device. You can watch it now
or at any time within the rental period.
» For the downloaded video on the USB
storage device, you can watch it only
on this player.
6 Use the remote control to play and
control the video.
Stream media from an
Android device
With Philips SimplyShare, through this player
youcanstreammedialesfromanAndroid
based device on your TV. For details, visit
www.philips.com/support
Stream multimedia via
Miracast
Through this player, you can stream audio and
videofromaMiracastcertieddevicetoyour
TV, and the screen of the Miracast device is
viewed on your TV.
What you need
• Smartphones or tablets with Android 4.2/
Windows 8.1 or above, and check those
devices on whether Miracast feature is
available (the name of Miracast feature
may vary on different devices).
• Enable Miracast on your smartphone or tablet
(refer to a related user manual for details).
• Make sure that Miracast is enabled on
this player (press , and select [Setup] >
[Network] > [Miracast break-in] > [On]).
1 Press to display the home menu screen
of this player.
2 On the Miracast source device, initiate
the search for this player and select this
player when it is found (refer to the source
device's user manual for details).
• Ifthisisthersttimethese2devices
are paired, an acknowledgement
message is displayed on your TV.
Accept it to continue the pairing.
• To cancel the pairing, press on the
remote control.
3 Wait until the media content from the
source device is displayed on your TV, then
choose the media to start play.
» Audio or video is streamed to your TV
through this player.