FOR HOME CARE SERVICE PROVIDER USE ONLY
Accessing Prescription Setting Screens
WARNING
The information on this page is ONLY for home care service providers. Remove this page from the manual
before giving the manual to the patient.
Full and Limited Menu Access Modes
The ventilator has two levels of menu access, Full and Limited. Full Menu Access allows you to alter
all available settings. Limited Menu access permits the user to alter only those prescription settings
that aect patient comfort, such as Rise Time or Flex, if they are available as part of the prescription.
Turning the Lock settings o in Full Menu Access mode allows users to modify them. See Chapter 5
for more information. The ventilator defaults to Full Menu Access mode.
When the device is in Limited Menu Access mode, use the following key sequence to enter Full
Menu Access mode:
1. From the Standby or Monitor screen, press the Down button and the Alarm Indicator/Audio
Pause button simultaneously for several seconds. This temporarily places the device in Full
Menu Access mode.
2. If you perform this key sequence from the Monitor screen, the Main Menu appears. If you
perform it from the Standby screen, the Setup screen appears.
3. An audible indicator sounds indicating you are now in Full Menu Access mode.
4. You can access the Options menu and permanently change the Menu Access setting to Full.
Otherwise, the device will return to Limited mode once you exit the menu screens or if one
minute passes without pressing any device buttons.
Note: Chapter 5 provides detailed descriptions of the Full and Limited Menu screens.
Note: Philips Respironics recommends that you set the device back to Limited Menu Access mode before returning it
to the patient so patients cannot change their prescription settings.
To Next Page
Loading...