2 Pull the shoulder slings forward (1) and fasten them to the Velcro
strips on the waistband (2).
3 Remove clothing from the area to be treated.
Note: Make sure the skin in the area to be treated is clean, entirely dry and
free from creams, lotions and other cosmetics.
4 Put the upper back strap on like a jacket. First put one arm through
the shoulder sling attached to the waistband on one side and then
do the same on the other side.
Note: Make sure the BlueTouch Pain Relief Patch in the strap is located on the
area to be treated and the LED area is in contact with the skin.
5 Fasten the waistband with the Velcro strips.
6 Adjust the shoulder slings to the preferred length.
7 Alternatively, you can rst put the upper back strap on your back,
fasten the waistband and then attach the Velcro strips of the shoulder
slings crosswise to the waistband. This may provide a better t for
some individuals.
1
2
ENGLISH20
To Next Page