Philips CD 630 - PROGRAMME AND FTS PLAYBACK; Playing Programmes; Favourite Track Selections (FTS)

PLAYING THE PROGRAMME
• Press PLAY/REPLAY.
> PROGRAM PLAY lights up and playback starts with the first
number of the programme.
All keys can be used during programmed play. Search for a
particular passage is only possible within the track being played.
As soon as you reach the beginning of the track, BEGIN OF NR
lights up; when you reach the end the track, END OF NR lights up.
As long as the player is in the direct programming mode you can
continue to add to the programme during playback. When
STOP/CM is pressed or when the programme has been played,
the disc stops, but the programme remains stored. The pro¬
gramme will be erased when you open the tray or if you press
STOP/CM twice in succession during playback. _
FAVOURITE TRACK SELECTIONS (FTS)
For each disc you can store two programmes in the player’s
permanent (FTS) memory.
Your favourite track selections of a given disc can then be called
up and played whenever you wish.
The selections will remain stored in the FTS memory even if you
play the entire disc or compile a different programme from it.
The number of discs which can be stored in the FTS memory
depends on the number of tracks in each programme._
STORING A FAVOURITE TRACK SELECTION
• Compile your programme as described inthe PROGRAMMING
section.
• Press FTS 1.
> FTS MEMO 1 starts flashing.
• Press STORE.
> STORED lights up, followed by the ranking number of this
programme.
> The selection is now stored in the FTS 1 memory under this
ranking number.
If you wish to store a further selection from the same disc:
• Press STOP/CM. (If you have stored the first programme
during playback you must press STOP/CM twice.)
• Compile your programme as described inthe PROGRAMMING
section.
• Press FTS 2.
> FTS MEMO 2 starts flashing.
• Press STORE.
> STORED lights up, followed by the ranking number of this
programme.
> The selection is now stored in the FTS 2 memory under this
ranking number.
Note!
- If a selection of a particular disc had already been stored, then
it is automatically erased and the new selection is stored under
the old ranking number.
- If NO SPACE appears after you have pressed STORE, then the
FTS memory is full: you must erase one or more old FTS
programmes to make room to store the new programme.
- If NO PROGRAM appears after you have pressed STORE, then
no programme has been compiled first._
FTS PROGRAMMED PLAY
• Press FTS 1 or FTS 2.
> FTS MEMO 1 or FTS MEMO 2 starts flashing.
• Press PLAY/REPLAY.
> FTS MEMO 1 or FTS MEMO 2 now lights up continuously.
> PROGRAMPLA Ylights up and the chosen selection will now be
played.
If NOTIN FTS f, NOT IN FTS 2 or NO FTS FOUND appears, no
favourite selection has been stored.
• Press STOP/CM twice if you wish to revert to normal play.
All keys can be used while a favourite selection is being played.
Search for a passage is only possible in the track which is being
played. As soon as you reach the beginning of the track, BEGIN
OF NR lights up; when you reach the end the track, END OF NR
lights up.
As long as the player is in the direct programming mode you can
continue to add to the programme during playback._
6