1. 'ON/OFF' button: for turning the player on and off.
2. 'PAUSE' LED: lights up when you press the
'PAUSE' button.
3. 'PROGR' (amme) indicator: this indicates how many
tracks a CD contains by means of lit LEDs; also
aids in compiling a program.
4. 'TRACK' indicator: shows how the record is playing
by means of a lit LED; is also used to designate the
numbers you want to program.
5. REPEAT LED: Lights up when you press the
REPEAT button.
6. ERROR LED: Flashes if you make an error in
operation or programming.
7. 'PLAY/NEXT' button: for starting playback ('PLAY')
and going to the next track during playback
('NEXT').
8. 'PAUSE' button: for short interruptions in playback;
the sound cuts out but the CD keeps spinning.
9. 'STOP/CM' key: for intermittently stopping playback
('STOP') and erasing a program ('CM' = Clear
Memory)
10. REPEAT button; for repeating a disc or a program.
11. 'REV FINE SEARCH' button: to find a specific
passage back in a track.
12. 'FWD FINE SEARCH' button: to search for a
specific passage further forward in a track.
13. 'PUSH TO OPEN': elevation on the lid that you
have to press to open the record compartment.
14. 'SELECT' button: for finding a track with which you
want to start playback and selecting tracks when
compiling a programme.
15. 'CANCEL' button: for omitting numbers you do not
want to hear in a programme.
16. 'STORE' button: for storing numbers when
compiling a programme.
To Next Page
Loading...
