Philips CDC926 - Selecting Another Track During Play.........00. 0. Sesseceseeereveeees; Selecting Another CD During Play; Searching for a Passage During Play; Starting with a Particular CD

oo. sited ESTER A MENA PNE ae ENES.
SELECTING ANOTHER TRACK DURING PLAY (1-0)
e Key in the desired track number (on the current CD);
numbers consisting of two figures must be keyed in within
2 seconds.
— The music stops and a moment later the selected track
begins to play.
NOT POSSIBLE lights up if you select a non existent number.
You can also select the number by using >I or a< 72
(press less than 0.5 seconds).
SELECTING ANOTHER CD DURING PLAY (DISC SELECT)
e Key in the desired CD number.
- The music stops and a moment later the selected CD begins
to play.
NOT POSSIBLE lights up if you select a non existent number.
You can also select the number by using the DISC button 6 on
the remote control (CDC 926 only).
SEARCHING FOR A PASSAGE DURING PLAY (<< >>)
e Hold a 72 down to search backwards to the beginning.
e Hold > 72 down to search forwards to the end.
The searching speed is determined by how long a key is
pressed:
— the first 2 seconds fairly slowly, with sound;
— then at the maximum speed, with no sound.
If you reach the end of the last track and release >|, play will
resume a few seconds before the end of the CD.
STARTING WITH A PARTICULAR CD (DISC SELECT)
e Key in the required CD number.
— If the CD compartment was open, it will now close.
— Play starts from the selected CD.
NOT POSSIBLE lights up if you select a non existent number.
You can also select the number by using the DISC button 6 on
the remote contro (CDC 926 only).
STARTING WITH A PARTICULAR TRACK (1-0)
e First select the number of the required CD using DISC
SELECT 6 or DISC 6 on the remote control (CDC 926 only).
e Then key in the required track number (numbers consisting
of two figures must be keyed in within 2 seconds).
— If the CD compartment was open, it will now close.
— Play starts from the selected track.
You can also select the (track) number by using >I or €< 72
(press less than 0.5 seconds) and then pressing
PLAY/REPLAY 74.
NOT POSSIBLE lights up if you select a non existent (track)
number.
SCANNING CDs (SCAN)
All CDs:
e Press SCAN 78 before or during play.
~ If. the CD compartment was open, it will now close.
— SCAN lights up and the first 10 seconds of each track are
played in turn (starting from the current track). 10 seconds
are counted down each time under REM{aining) TRACK
TIME,
e When the player reaches a track which you wish to hear in
full, press SCAN again or PLAY/REPLAY
One CD:
14.
e Select the number of the required CD using DISC SELECT 6
or DISC 6 (on the remote control - CDC 926 only).
e Press SCAN 78, within the time the CD number is flashing
on the display.
— Now only the first 10 seconds of each track on the selected
CD will be played in turn.
PLAYING IN RANDOM ORDER (SHUFFLE)
All CDs:
e Press SHUFFLE 76 before or during play.
— If the CD compartment was open, it will now close.
— SHUFFLE lights up and all the tracks are now played ina
random order.
— lí you press >i 72, you will select any one of the following
tracks.
e Press SHUFFLE again if you wish to return to normal play.
NOTE!
lf, during play, you open the CD compartment to change CDs
(see ‘NORMAL PLAYBACK’ on page 10) then playback in
random order will be cancelled. Playback will stop as soon as
the last track of the current CD has been played (in normal
order).
One CD:
e Select the number of the required CD using DISC SELECT 6
or DISC 6 (on the remote control - CDC 926 only).
e Press SHUFFLE 16, within the time the CD number is
flashing on the display.
— DISC and SHUFFLE light up; the tracks of the selected CD
will now be played in a random order.
— |f you press >] 72, you will select any one of the following
tracks.
If you press REPEAT 77, the tracks will be repeated in a
different order each time, although the first track will always
be the same.
— When all tracks of the selected CD have been played,
playback stops.
e Press SHUFFLE again if you wish to return to normal play.